« Prev | | Next »

Sort by:


Rapid Injection Molding
Rapid Injection Molding is done by injecting thermoplastic resins into a mold, just as is done in production injection molding.
Article Published: 8/17/2011
CNC Machining
With CNC machining a solid block of plastic is clamped into a CNC mill and cut into a finished part.
Article Published: 8/17/2011
Poly-Jet
Poly-Jet (PJET) uses inkjet heads to jet a UV-curable material in very thin layers at high resolution.
Article Published: 8/17/2011
Three Dimensional Printing
Three Dimensional Printing (3DP) uses an inkjet head and a water fusible material similar to “Plaster of Paris”. The machine lays down a thin layer of plaster powder; the inkjet head passes over and sprays tiny drops of water wherever so...
Article Published: 8/17/2011
Fused Deposition Modeling
The Fused Deposition Modelilng (FDM) process builds parts from the bottom up through the use of a computer controlled print head.
Article Published: 8/17/2011
Selective Laser Sintering
The Selective Laser Sintering (SLS) process uses a laser to build parts by sintering (fusing) powdered material layer by layer from the bottom up.
Article Published: 8/17/2011
Stereolithography
Stereolithography (SLA) is an additive fabrication process that builds parts in a pool of UV-curable photopolymer resin using a computer controlled laser.
Article Published: 8/17/2011

« Prev | | Next »


Home > Zones